Discount Shopping Deals

Best Deals of the Day

Home  Office Supplies  3d Printing  3d Printer Module Board  Electronics 

Category Office Supplies 3d Printing 3d Printer Module Board Electronics

Sort: Name | Price
  • 10Pcs Geekcreit® 3D Printer A4988 Reprap Stepping Stepper Step Motor Driver Module
  • 10pcs Geekcreit® 3d Printer A4988 Reprap Stepping Stepper S...
    SKU: 955808

    Description: A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current ...

  • $22.42

    Select Option
  • 10Pcs Geekcreit® 3D Printer Stepstick DRV8825 Stepper Motor Driver Reprap 4 Layer PCB
  • 10pcs Geekcreit® 3d Printer Stepstick Drv8825 Stepper Motor...
    SKU: 968927

    Descriptions: The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature...

  • $26.08

    Select Option
  • 3D printer Kit for  CNC Shield V3+UNO R3+A4988*4 GRBL for 3D Printer Part
  • 3d Printer Kit For Cnc Shield V3+uno R3+a4988*4 Grbl For 3d...
    SKU: 1143532

    Features: 1. Can be directly used for laser engraving machine, 3D printers. 2. Users write into light carving or 3D printer firmware, 3. Connected to the stepper motor, and other peripheral accessories, it can use. Specifications: Size: board: 70 x 55mm CNC shield V3: 70 x 55mm 4 A4988: 20 x 15mm...

  • $24.37

    Select Option
  • 3Pcs Geekcreit® 3D Printer Stepstick DRV8825 Stepper Driver Reprap 4 Layer PCB
  • 3pcs Geekcreit® 3d Printer Stepstick Drv8825 Stepper Driver...
    SKU: 1052018

    Description: The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature ...

  • $11.95

    Select Option
  • 3Pcs Geekcreit® RAMPS 1.4 Endstop Switch For RepRap Mendel 3D Printer With 70cm Cable
  • 3pcs Geekcreit® Ramps 1.4 Endstop Switch For Reprap Mendel ...
    SKU: 1054557

    Features: It using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of u...

  • $8.75

    Select Option
  • 3PCS MKS CD 57/86 Stepper Motor Driver Current Expansion Board For 3D Printer
  • 3pcs Mks Cd 57/86 Stepper Motor Driver Current Expansion Boa...
    SKU: 1169693

    Perfect match with: (package does includes) Motor driver with 4.5A: MKS TB6600 3D printer motherboard: MKS-Gen Feature: In current 42 motor-driver of 3D printer on the market is that the direct primary IC connect to motor driver IC, the current consumed by each interface will not exceed 2MA. The ...

  • $14.84

    Select Option
  • 5pcs 3D Printer 42 Stepper Motor Drive Expansion Board 8825 / A4988
  • 5pcs 3d Printer 42 Stepper Motor Drive Expansion Board 8825 ...
    SKU: 1158842

    Features: 1. On-board DIP switch, you can easily adjust the drive segments 2. Terminal power connector for easy connection drive power 3. Compatible with 12 / 24V drive scheme 4. Suitable for 42 stepper motor drive, 3D printers and DIY Specifications: Size: 42 x 42 x 15mm Fixed: 3mm Pitch: 1400 x...

  • $25.00

    Select Option
  • 5Pcs Geekcreit® 3D Printer Stepstick DRV8825 Stepper Motor Driver Reprap 4 Layer PCB
  • 5pcs Geekcreit® 3d Printer Stepstick Drv8825 Stepper Motor ...
    SKU: 968935

    Description: The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature ...

  • $15.95

    Select Option
  • 5PCS MKS CD 57/86 Stepper Motor Driver Current Expansion Board For 3D Printer
  • 5pcs Mks Cd 57/86 Stepper Motor Driver Current Expansion Boa...
    SKU: 1169692

    Perfect match with: (package does includes) Motor driver with 4.5A: MKS TB6600 3D printer motherboard: MKS-Gen Feature: In current 42 motor-driver of 3D printer on the market is that the direct primary IC connect to motor driver IC, the current consumed by each interface will not exceed 2MA. The ...

  • $19.29

    Select Option
  • 5PCS TB6600 Upgraded Version 32 Segments 4A 57/86 Stepper Motor Driver
  • 5pcs Tb6600 Upgraded Version 32 Segments 4a 57/86 Stepper Mo...
    SKU: 1145693

    Features: 1. 9V-40V DC power supply 2. H-bridge bipolar constant phase flow driver 3. The maximum output current is 4.0A (eight optional) 4. Up to 32 segments of six kinds of sub-modes available 5. The input signal high-speed photoelectric isolatio 6. Standard common anode single pulse interface 7....

  • $67.58
    $63.11 6.61% Discount

    You save: $4.47

    Select Option
  • CNC Shield + 4 X DRV8825 Driver Kit For Arduino 3D Printer
  • Cnc Shield + 4 X Drv8825 Driver Kit For Arduino 3d Printer
    SKU: 1134939

    - CNC Shield Board Version: 3.0 Color: Red Size(L*W*H): 68 x 53 x 18 mm Voltage: DC 12~36 V Features: 1. Uses removable A4988 or DRV8825 compatible stepper drivers. 2. The extension board can be used for carving machine, 3 d printer driver expansion board 3. G...

  • $16.16

    Select Option
  • CNC Shield Board + 4Pcs A4988 Stepper Motor Driver For  3D Printer
  • Cnc Shield Board + 4pcs A4988 Stepper Motor Driver For 3d P...
    SKU: 1105262

    CNC Shield Board: Version: 3.0 Color: Red Size (L*W*H): 68 x 53 x 18 mm Voltage: DC 12~36 V (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) Features: 1. Uses removable A4988 or DRV8825 compatible stepper driv...

  • $15.86

    Select Option
  • Geekcreit® 3D Printer A4988 Reprap Stepping Stepper Motor Driver Module
  • Geekcreit® 3d Printer A4988 Reprap Stepping Stepper Motor D...
    SKU: 88765

    Description: A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current ...

  • $7.60

    Select Option
  • Geekcreit® 3D Printer Stepstick DRV8825 Stepper Motor Driver Reprap 4 Layer PCB
  • Geekcreit® 3d Printer Stepstick Drv8825 Stepper Motor Drive...
    SKU: 920162

    Description: The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature ...

  • $8.41

    Select Option
  • Geekcreit® RAMPS 1.4 + Mega2560 + A4988 + 2004LCD Controller 3D Printer Kit
  • Geekcreit® Ramps 1.4 + Mega2560 + A4988 + 2004lcd Controlle...
    SKU: 1110876

    3D Printer Controller RAMPS 1.4: The RepRap Ar duino compatible ME GA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduin o compatible Me ga with the powerful Arduin o compatible ME GA plat...

  • $39.00
    $37.93 2.74% Discount

    You save: $1.07

    Select Option
  • Geekcreit® RAMPS 1.4 Control Board  + MEGA2560 R3 + A4988 Driver With Heat Sink 3D Printer Mainboard Kit
  • Geekcreit® Ramps 1.4 Control Board + Mega2560 R3 + A4988 D...
    SKU: 984594

    Features:   About RAMPS 1.4: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap. RAMPS interfaces an ArduinoMega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder contr...

  • $29.91

    Select Option
  • Geekcreit® RAMPS 1.4 Endstop Switch For RepRap Mendel 3D Printer With 70cm Cable
  • Geekcreit® Ramps 1.4 Endstop Switch For Reprap Mendel 3d Pr...
    SKU: 958124

    Features: - It using 22AWG wire, the copper wire inside is very thick, can be resistant to current 2A, 300V voltage. - IAn insulating layer over a wide range of temperatures, up to 80 degrees.  - IIt is the common connection of thin copper wire cannot match. Not easy to pull off, plug it con...

  • $7.08

    Select Option
  • Geekcreit® UNO R3 Board ZUM Scan Shield Expansion Open Source Kit For DIY Ciclop 3D Printer Scanner
  • Geekcreit® Uno R3 Board Zum Scan Shield Expansion Open Sour...
    SKU: 1088312

    Features: As this is open source, for some detailed parts, it is not totally like the original one, we update it and delete some useless,but the usage is like original one, (if you care about our products is not totally like original one, pls do not place order) we test the board before we send to ...

  • $18.47

    Select Option
  • Lerdge® X Integrated Controller Board Mainboard With 32-bit Coretx-M4 Core Control Unit + 3.5inch LCD Touch Screen For Reprap 3D Printer
  • Lerdge® X Integrated Controller Board Mainboard With 32-bit...
    SKU: 1309753

    Description: Among Lerdge 3D Printer boards, Lerdge-X is a highly integrated control board designed for the Small 3D Printers, Educational 3D Printers and Entry-level 3D Printers. The mainboard uses a 32-bit coretx-M4 Core control unit, strong and stable performance, feature-rich, price concessions...

  • $79.15
    $72.43 8.49% Discount

    You save: $6.72

    Select Option
  • Mini-Rambo 1.3 Mainboard Integrated Controller Board + 4pcs Heatsinks For Prusa i3 MK2 3D Printer
  • Mini-rambo 1.3 Mainboard Integrated Controller Board + 4pcs ...
    SKU: 1330858

    Description: RAMBo (RepRap -compatible Mother Board) is an all in one RAMPS class motherboard targeting convenience, reliability, and performance. Features: Logic - MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware - Crystals for both...

  • $100.08
    $91.45 8.62% Discount

    You save: $8.63

    Select Option
  • MKS CD 57/86 Stepper Motor Driver Current Expansion Board For 3D Printer
  • Mks Cd 57/86 Stepper Motor Driver Current Expansion Board Fo...
    SKU: 1105020

    Perfect match with: (package does includes) Motor driver with 4.5A: MKS TB6600 3D printer motherboard: MKS-Gen Feature: In current 42 motor-driver of 3D printer on the market is that the direct primary IC connect to motor driver IC, the current consumed by each interface will not exceed 2MA. The ...

  • $8.86

    Select Option
  • MKS HLKWIFI Module 3D Printer Control Board Remote Control For MKS TFT Touch Screen
  • Mks Hlkwifi Module 3d Printer Control Board Remote Control F...
    SKU: 1088343

    MKS HLKWIFI Module 3D Printer Control Board Remote Control For MKS TFT Touch Screen Introduce: MKS-HLKWIFI is created by MakerBase(MKS) based on HLK-RM04 module, which is suitable for open-source 3D printer. Also, MKS-HLKWIFI is used for MKS Base (updated version 1.2), MKS Gen, MKS Mini, MKS SBase...

  • $30.52

    Select Option
  • MKS-GEN L V1.0 Integrated Controller Mainboard + 5pcs TMC2208 V1.0 Stepper Motor Driver Compatible Ramps1.4/Mega2560 R3 For 3D Printer
  • Mks-gen L V1.0 Integrated Controller Mainboard + 5pcs Tmc220...
    SKU: 1296711

    MKS-Gen L Overview: Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS-Gen L, which provides more flexible choices for users. Features: 1. 2560 and Ramps 1.4 are integrated in t...

  • $59.25
    $56.40 4.81% Discount

    You save: $2.85

    Select Option
  • TB67S109AFTG 32 Segments 4A Two Phase 57/86 Stepper Motor Driver Controller for 3D Printer
  • Tb67s109aftg 32 Segments 4a Two Phase 57/86 Stepper Motor Dr...
    SKU: 981997

    Features: 1. 9V-40V DC power supply 2. H-bridge bipolar constant phase flow driver 3. The maximum output current is 4.0A (eight optional) 4. Up to 32 segments of six kinds of sub-modes available 5. The input signal high-speed photoelectric isolatio 6. Standard common anode single pulse interface 7....

  • $16.87

    Select Option
Thank you for your purchase
All orders are processed the very same day!
  • About Us

  • BargainBruteUpdate_(1).png

  • We are a Family Owned Colorado Strong, Online Shopping Website where you will find one of the internet's largest selection of products with th... Read More
logo-paypal.jpg